- CE certification introduction
The CE mark is a legally mandatory mark in the EU market. Regardless of whether the products are produced by companies within the European Union or produced by other countries, if they want to circulate freely on the EU market, they must be affixed with the CE mark to indicate that the products comply with the EU's The New Approach to technical harmonization and standardization). The new version of the 2014/35 / EU Low Voltage (LVD) Directive and the 2014/30 / EU (EMC) Directive replace the old Directive (2006/95 / EC) on April 20, 2016. The differences between the new and old directives are: Obligations of distributors, manufacturers and importers in the EU market, in particular those relating to manufacturers and importers. Manufacturers assume the main responsibility for product conformity assessment, and manufacturers and importers should bear similar liability obligations; 2. Use more comprehensive measures to trace the supply chain of products, and strengthen market control and supervision, prohibiting substandard products or products at risk Circulation on the EU market.
CE certified product range
Information technology and office equipment \ Communication terminal equipment \ Automatic controllers for appliance switches and household appliances \ Safety transformers and similar equipment \ Household and similar equipment \ Electronic entertainment equipment \ Lighting equipment and drive power
Basic Information
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
No
|
- Introduction of EU ErP certification
In order to improve the environmental performance of energy-consuming products and control ecological and environmental pollution. On October 31, 2009, the European Union formally issued the Ecological Requirements Directive 2009/125 / EC for energy-related products, namely the ErP (Enterrealted Products) Directive "Directive to Establish a Framework for the Ecological Design Requirements of Energy-Related Products", which is EuPhoria The (Enter-using Products) Directive (2005/32 / EC) was rewritten and became effective on November 10, 2009.
ErP certified product range
General (including information technology products, radios, cameras, video recorders, power amplifiers, home theaters, musical instruments, other audio and video equipment), televisions, set-top boxes, external power supplies, computers and servers, ovens, range hoods, fans, rollers Washing machine, vacuum cleaner, washing machine.
Basic Information
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
No
|
- European RoHS test introduction
RoHS is the English abbreviation of the "Restriction of the use of certain hazardous substances in electrical and electronic equipment".
Countries around the world adopt the RoHS standard according to the IEC62321 standard
The new European RoHS is CE / RoHS certification Directive 2011/65 / EU.
European CE-RoHS is compulsory and is part of other CE.
RoHS test product range
1. Large household appliances: refrigerators, washing machines, microwave ovens, air conditioners, white goods, such as refrigerators, washing machines, microwave ovens, air conditioners, vacuum cleaners, water heaters, etc.
2. Small household appliances: vacuum cleaners, electric irons, hair dryers, ovens, clocks, etc., black appliances such as audio, video products, DVDs, CDs, TV receivers, IT products, digital products, communication products, etc
3. IT and communication equipment: computers, fax machines, telephones, mobile phones, etc., electric tools; electric electronic toys; medical electrical equipment.
4. Civil equipment: radio, television, video recorder, musical instrument, etc.
5. Lighting equipment: fluorescent lamps, etc. other than domestic lighting, lighting control devices
6. Power tools: electric drill, lathe, welding, sprayer, etc.
7. Information technology and telecommunications equipment (although infrastructure equipment is exempted in some countries) 4. Consumer equipment. 5. Lighting equipment including bulbs.
6. Electronic and electrical tools. 7 Toys, leisure and sports equipment.
8. Medical devices (currently exempt)
9. Monitoring and control instruments (currently exempted)
10. Vending machines.
11. Semiconductor devices. - Customs Union CU-EAC certification introduction
The Customs Union Technical Regulations Certificate (CU-TR) is the only proof that the product complies with the technical regulations of the Customs Union. The certificate is applicable to Russia, Belarus and Kazakhstan. Beginning February 15, 2013, Russia, Belarus, Kazakhstan, and the three countries have begun to enforce the Customs Union technical regulations certification. The CU-TR certification mark is EAC, also known as CU-EAC. In 2014, Armenia and Kyrgyzstan also joined the Customs Union.
Certificate format and certification mark
The Customs Union TR certificate implements a new certificate format and certification mark, the mark is EAC mark.
CU-EAC certified product range
The safety technology regulations cover a wide range of products, including electrical products with voltages between 50V ~ 1000VAC and 75V ~ 1500VDC, including household appliances, audio and video products, information technology equipment, lighting equipment, etc. The test requirements cover safety and EMC.
Basic Information
Certification type
|
Mandatory
|
Technical Information
|
120V 60Hz
|
Certification mark
|
|
Factory inspection
|
Approved CGI023 factory inspection report
|
Certification cycle
|
2-3 weeks
|
Certificate validity period
|
5 Year
|
- North American Safety Certification Introduction
North American safety certification (voluntary) is mainly based on regulatory requirements. For example, the NRTL certification system in the United States is based on the requirements of US Federal Regulation CFR29. It is managed by the Occupational Health and Safety Administration (OSHA) of the US Department of Labor and sold to the United States, Canada, and other regions. Electrical products must be tested in accordance with UL or CSA related standards and affixed with a safety mark to indicate that the product has met the relevant safety standards. Safety-labeled products can win consumers' favor and avoid market spot checks. In principle, electrical products sold in North America should be labeled with safety labels. The electrical and electronic products covered by CFR29 are considered to meet the requirements of North American regulations, such as UL, ETL, cTUVus, CSA, etc., as long as they have obtained one of the many NRTL (nationally recognized laboratories) certifications.
North American Safety Certified Product Range
Information technology and office equipment \ Communication terminal equipment \ Automatic controllers for appliance switches and household appliances \ Safety transformers and similar equipment \ Household and similar equipment \ Electronic entertainment equipment \ Lighting equipment and drive power
Basic Information
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
|
Factory inspection
|
First inspection + 4 supervisions per year
|
Certificate validity period
|
No
|
- US FCC certification introduction
FCC certification is based on the requirements of US Federal Regulation CFR49 and is administered by the US Federal Communications Commission (FCC). FCC certification is a compulsory certification for electromagnetic compatibility in the United States. The FCC in the United States has regulations on electromagnetic interference generated by electronic products operating at 9KHZ-3000GHz.
FCC certified product range
FCC regulated products include AV.IT. radio products and microwave ovens, etc.
FCC certification mode
FCC certification type
|
verification method
|
FCC-SDOC
Declaration of conformity
|
The United States Federal Communications Commission (FCC) used to use different authentication methods for electronic products according to product types. There are three types of authentication methods: VoC method (Verification), DoC method (Declaration of Conformity), and ID method (Certification). However, starting on November 2, 2017, the FCC merged DoC and VoC into a SDoC (Supplier's Declaration of Conformity), and revised the relevant FCC provisions.
|
FCC-Certification
|
The product must pass the FCC registration and laboratory test. After obtaining the test report, organize the technical information of the product, including: product details photos, circuit diagrams, schematic block diagrams, user manuals, etc., and send the test report to the FCC-accredited certification authority TCB approval. TCB issues a certificate after confirming that all information is correct, and authorizes the applicant to use the FCC ID. For customers applying for FCC certification for the first time, they must first apply to the FCC for a Grantee Code (company number). After the product passes the test and certification, the FCC ID is marked on the product.
|
Basic Information
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
No
|
- Introduction to CEC Energy Efficiency Certification in California
CEC is the Appliance Efficiency Regulations implemented by the California Energy Commission on December 30, 2005. The purpose is to reduce California ’s energy consumption, improve the energy system, promote a strong economy, and maintain a healthy environment. The standards in this regulation apply to products sold or marketed in California, refer to regulation CEC-400-2012-019-CMF.
California CEC Certified Product Range:
Audio / Video Equipment / External Power ExternalPS \ Large Battery Charger
TV Televisions \ Small Battery Charger
Basic Information:
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
Depending on the product
|
Factory inspection
|
No
|
Certificate validity period
|
Depending on the product
|
- Canadian IC certification introduction
IC is the abbreviation of Industry Canada, which is responsible for the certification of electronic and electrical products entering the Canadian market. Its product range includes radio and television equipment, information technology equipment, radio equipment, telecommunications equipment, engineering medical equipment, etc. Currently there are mandatory requirements only for electromagnetic interference.
IC certification mode:
Certification type
|
Mandatory
|
IC
|
Radio and television equipment, information technology equipment, telecommunications equipment
Engineering medical equipment, etc.
|
IC-ID
|
Radio equipment
|
Basic Information:
Certification type
|
Mandatory
|
Technical Information
|
110V 60Hz
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
No
|
- CCC certification introduction
The full name of 3C certification is "compulsory product certification system". It is a product conformity assessment system implemented by the Chinese government in order to protect consumers' personal safety and national security, strengthen product quality management, and comply with laws and regulations. The State Administration of Supervision, Inspection and Quarantine and the National Certification and Accreditation Administration of the People's Republic of China jointly issued the "Compulsory Product Certification Management Regulations" on December 3, 2001, and implemented a "unified catalog and unified standard" for the 19 categories and 132 products listed in the catalog And assessment procedures, unified logos and unified fees "for compulsory certification management. The original "CCIB" certification and "Great Wall CCEE certification" are unified as "China Compulsory Certification" (the English name is China Compulsory Certification), and its English abbreviation is "CCC", so it is also referred to as "3C" certification. The 3C mark is not a quality mark, but only a basic safety certification.
Classification of certification mark:
1. CCC + S safety certification mark;
2. CCC + EMC electromagnetic compatibility certification mark;
3. CCC + S & E safety and electromagnetic compatibility certification mark;
4. CCC + F fire certification mark;
Basic Information:
Certification type
|
Mandatory
|
Certification mark
|
|
Factory inspection
|
Depending on the authentication mode
|
Certificate validity period
|
Depending on the authentication mode
|
- CQC certification introduction
CQC mark certification is one of the voluntary product certification services carried out by the China Quality Certification Center. By adding the CQC mark, it indicates that the product meets the relevant quality, safety, performance, electromagnetic compatibility and other certification requirements. The scope of certification covers mechanical equipment and electrical equipment , Electrical, electronic products, textiles, building materials and more than 500 products. The CQC mark certification focuses on safety, electromagnetic compatibility, performance, and hazardous substance limit (RoHS) indicators that directly reflect product quality and affect consumers 'personal and property safety. It aims to safeguard consumer interests, promote product quality, and enhance domestic companies' International Competitiveness.
The need for CQC certification:
1. The product has passed the CQC certification, which indicates that the company's products fully meet or exceed national or industry related standards, which greatly improves the company's image and product quality;
2. Many types of products certified by CQC are components. If the company's products have passed the CQC certification, the customer's complete machine product does not need to repeat random testing when it is finished product certification. On the one hand, test costs can be saved, and on the other hand, test risks can be reduced.
3. With the improvement of people's living standards, consumers have higher and higher requirements for product quality and safety, and certified products are more likely to be favored by consumers.
Basic Information:
Certification type
|
Voluntary
|
Certification mark
|
|
Factory inspection
|
Depending on the authentication mode
|
Certificate validity period
|
Depending on the authentication mode
|
- Introduction to SRRC certification
SRRC certification (also known as SRMC certification), formerly known as the State Radio Regulation Committee (SRRC), China's State Radio Monitoring Center (SRMC), is the only radio model in mainland China that is authorized to test and certify Prescribed institutions. At present, China has established special frequency ranges for different types of radio transmitting equipment, and not all frequencies can be legally used in China. In other words, all radio transmitting equipment sold or used in its territory will specify different frequencies. In addition, applicants must pay attention to the specified scope of certain radio transmitting equipment, not only to apply for "radio type approval certification", but also to apply for China Compulsory Certification (CCC) and / or network access permit (MII) approval.
Basic Information:
Certification type
|
Mandatory
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
5 years
|
- Network Access License Introduction
The state implements a network access permit system for telecommunication terminal equipment, radio communication equipment and telecommunications equipment that are connected to the public telecommunication network. Telecommunications equipment that implements the network access permit system must obtain a network access license (including trial approval for network access) issued by the Ministry of Industry and Information Technology.
Article 54 of the《中华人民共和国电信条例》(国务院令第291号)The State implements a network access permit system for telecommunication terminal equipment, radio communication equipment and equipment related to interconnection between networks. Telecommunications connected to public telecommunication networks Terminal equipment, radio communication equipment, and equipment related to interconnection between networks must meet national standards and obtain network access licenses. "
Basic Information:
Certification type
|
Mandatory
|
Certification mark
|
|
Factory inspection
|
No
|
Certificate validity period
|
3 years
|